How to assemble the Football Playing Robot from CODEBOX Drive.

The Football Playing Robot is based on the Rover. Below you will find instructions, how to transform the Rover into the Football Playing Robot.

1. Prepare the Rover.

2.

3.

4.

List of required parts:

Prepare parts needed for the base of the robot’s arms:

5.

6.

7.

Prepare the parts for the arms:

8.

9.

10.

11.

12.

Prepare the parts for the shields and antennas.

13.

14.

15.

16.

17.

Prepare the parts for the flag.

18.

19.

20.

Connecting electronic modules

1. Connect the motors to the M1 and M2 ports of the LOFI Brain. Make sure the small metal walls inside the pins of the motor cables are facing the plastic walls of the pins on the controller.

2. Connect the powerbank to the micro USB slot on the Adapter.

3. Connect the distance sensor to the corresponding slot on the Adapter. Make sure you have connected the pins VCC, TRIG, ECHO, and GND as shown in the picture below.

4. If you are using a Bluetooth module, connect it to the corresponding slot on the adapter. Make sure you put the module in the right direction, see the picture below.