How to assemble the Light Following Robot from CODEBOX Drive kit.
The Light following robot is based on the Rover. Below you will find instructions on how to transform the Rover into the Light Following Robot.
1. Prepare the Rover.
Prepare parts for the front of the robot.
Prepare the parts for the “face” of the robot:
Connecting electronic modules
1. Connect the motors to the M1 and M2 ports of the LOFI Brain controller. Make sure the small metal walls inside the pins of the motor cables are facing the plastic walls of the pins on the controller.
2. Connect the powerbank to the micro USB slot on the Adapter.
3. If you are using a Bluetooth module, connect it to the corresponding slot on the adapter. Make sure you put the module in the right direction, see the picture below.
4. Connect the light sensors to INPUT 1 and INPUT 2.