How to assemble the Shuffle Robot from CODEBOX Starter kit.
Important – take off the stickers before mounting the servo.
15. Put a long screw at the bottom of the LOFI Brain controller for stabilization. Attach two short screws to the sides of the robot`s leg to give it more grip.
Connecting electronic modules
- Connect distance sensor with its cable to the dedicated port on LOFI Brain labeled as DISTANCE. This port is polarised so the plug has to be set in the right direction – put the blue wire on the side of M1 socket and the red wire on the side of INPUT4 socket.
- Connect the servo motor to OUTPUT1.